Applications
These transducers are designed for applications with reduced transducer access, or with surfaces with complex geometry where good coupling is not possible: Inspection of turbines, blade roots and thin welds.
General Characteristics
- Footprint < 8 x 8 mm2
- Center frequency 5 to 15 MHz
- Number of elements: 8 to 20
- Other characteristics similar to standard linear probes
Standard Configurations
| Freq. (MHz) | Nb elts | Pitch | Active lenght (mm) | Active width (mm) | Footprint |
| 10 | 10 | 0.31 | 3 | 3 | 5.5 x 5 |
| 10 | 16 | 0.25 | 4 | 4 | 6.5 x 6 |
| 10 | 16 | 0.31 | 5 | 5 | 7 x 7 |
| 10 | 20 | 0.31 | 6 | 6 | 8 x 8 |
| 5 | 8 | 0.5 | 4 | 4 | 6.5 x 6 |
| 5 | 8 | 0.6 | 5 | 5 | 7 x 7 |
| 5 | 12 | 0.5 | 6 | 6 | 8 x 8 |
Options
- Hard face for use in direct contact
- Integrated wedge
- Other options similar to standard linear probes